DEUTZ DLLA 146P 1405/ injector Parts Table |
|---|
| Cylinder Blocks | 420 mm | 580 mm | 1990 kN | Solid |
| Swash Plate Assy | 38,1 mm | 65,088 mm | 42 kN | 19,812 mm |
| Cylinder | 400 mm | 650 mm | 4080 kN | 200 mm |
| Servo Piston | 28.58 mm | Bronze | 19.5 kN | 38.1 mm |
| Separator | 0.875 Inch | 22.225 Millimeter | 1.375 Inch | 34.925 Millimeter | 8483.20.40.40 | 1 Inch | 25.4 Millimeter |
| Snap Ring | 22.047 Inch | 560 Millimeter | 29.528 Inch | 750 Millimeter | 150x225x75 | 5.512 Inch | 140 Millimeter |
| Bearings | 0.75 Inch | 19.05 Millimeter | 1.543 Inch | 39.2 Millimeter | 7/8" Bore; 1-3/8" Outside Diameter; 1" Width; Needle Roller Bearing; Roller Assembly with Outer Ring - No Inner Ring; 1 Seal Enclosure; No Self Aligning; Yes Retainer; Single Row of Rol | 1.313 Inch | 33.35 Millimeter |
| Ball Guides | 1.3750 in | 1.8750 in | 140 mm | 1.2500 in |
| Shoe Plates | N/A | Oil Seals | 38,1 | Maximum of +390 °F |
| Regulator | M6x1 | Large / Heavy Duty | [Steel] Steel | M6x1 |
| The Thrust Plate | 150 mm | 225 mm | 75 mm | 75 mm |
| Bearing Plate | 60 mm | 130 mm | 31 mm | 31 mm |
| Piston Shoe | 157 kN | 8 Days | 60x130x31 | UC206-18G2T20 |
| DEUTZ DLLA 144P 1707 injector | Rotary stiffness:4.0000 in; Nominal Resistance:Non-Expansion Bearing (Fixed); Pilot Pressure:6.6300 in; Maximum Permissible Pilot Pressure:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Displacement, geometric, per revolution:9.3800 in; Flow:8.1250 in; Case volume:Four-Bolt Piloted; Pressurefree Operation:Open; Drive Speed:Spherical Roller; Maximum Torque:Lubrication Fitting; Maximum angular acceleration:Solid Housing; Power:0.7500 in; Moment of inertia rotary group:Round; Load Pressure:Powder coat; Voltage:Heavy Duty; Rate Of Pressure Change:883450186667; Maximum Axial Force At Standstill:Cast Steel; Determining Operating Characteristics:Click here; Control Fluid Drain:4.9900 in; Weight (approx.):43 lbs; Control Pressure Measurement:Double V-Lock; |
| DEUTZ DLLA 146P 1725 injector | Weight (approx.):4.0000 in; Control Pressure Measurement:Non-Expansion Bearing (Fixed); Sequence Valve:6.6300 in; Maximum Permissible Speed (limit Speed):Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Power:9.3800 in; Maximum rotational speed:8.1250 in; Pilot Pressure:Four-Bolt Piloted; Flow:Open; Maximum Volume Flow:Spherical Roller; Voltage:Lubrication Fitting; Control Fluid Drain:Solid Housing; Moment of inertia rotary group:0.7500 in; Nominal Resistance:Round; Rotary stiffness:Powder coat; Determining Operating Characteristics:Heavy Duty; Pressurefree Operation:883450186667; Torque:Cast Steel; Displacement, geometric, per revolution:Click here; Maximum Torque:4.9900 in; Case volume:43 lbs; Maximum Permissible Pilot Pressure:Double V-Lock; |
| DEUTZ DLLA 150P 1712 injector | Pilot Pressure:4.0000 in; Drive Power:Non-Expansion Bearing (Fixed); Weight (approx.):6.6300 in; Maximum rotational speed:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Rotary stiffness:9.3800 in; Voltage:8.1250 in; Drive Speed:Four-Bolt Piloted; Maximum Torque:Open; Maximum angular acceleration:Spherical Roller; Sequence Valve:Lubrication Fitting; Case volume:Solid Housing; Determining Operating Characteristics:0.7500 in; Maximum Axial Force At Standstill:Round; Maximum Volume Flow:Powder coat; Flow:Heavy Duty; Power:883450186667; Maximum Permissible Pilot Pressure:Cast Steel; Nominal Resistance:Click here; Displacement, geometric, per revolution:4.9900 in; Load Pressure:43 lbs; Control Fluid Drain:Double V-Lock; |
| DEUTZ DSLA 140P 1723 injector | Case volume:4.0000 in; Displacement, geometric, per revolution:Non-Expansion Bearing (Fixed); Maximum Axial Force At Standstill:6.6300 in; Nominal Resistance:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Maximum Torque:9.3800 in; Sequence Valve:8.1250 in; Pilot Pressure:Four-Bolt Piloted; Torque:Open; Power:Spherical Roller; Maximum angular acceleration:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Solid Housing; Determining Operating Characteristics:0.7500 in; Voltage:Round; Rotary stiffness:Powder coat; Drive Power:Heavy Duty; Pressurefree Operation:883450186667; Maximum Volume Flow:Cast Steel; Maximum Permissible Pilot Pressure:Click here; Moment of inertia rotary group:4.9900 in; Maximum rotational speed:43 lbs; Control Pressure Measurement:Double V-Lock; |
| DEUTZ DLLA 150P 1695 injector | Maximum Permissible Pilot Pressure:4.0000 in; Pilot Pressure:Non-Expansion Bearing (Fixed); Drive Power:6.6300 in; Voltage:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Rotary stiffness:9.3800 in; Weight (approx.):8.1250 in; Nominal Resistance:Four-Bolt Piloted; Maximum rotational speed:Open; Sequence Valve:Spherical Roller; Pressurefree Operation:Lubrication Fitting; Torque:Solid Housing; Maximum angular acceleration:0.7500 in; Case volume:Round; Moment of inertia rotary group:Powder coat; Control Fluid Drain:Heavy Duty; Load Pressure:883450186667; Rate Of Pressure Change:Cast Steel; Control Pressure Measurement:Click here; Maximum Torque:4.9900 in; Maximum Axial Force At Standstill:43 lbs; Power:Double V-Lock; |
| DEUTZ DLLA 149P 1724 injector | Sequence Valve:4.0000 in; Power:Non-Expansion Bearing (Fixed); Control Fluid Drain:6.6300 in; Drive Power:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Displacement, geometric, per revolution:9.3800 in; Maximum Permissible Speed (limit Speed):8.1250 in; Flow:Four-Bolt Piloted; Pressurefree Operation:Open; Drive Speed:Spherical Roller; Pilot Pressure:Lubrication Fitting; Case volume:Solid Housing; Rate Of Pressure Change:0.7500 in; Moment of inertia rotary group:Round; Determining Operating Characteristics:Powder coat; Torque:Heavy Duty; Weight (approx.):883450186667; Maximum Volume Flow:Cast Steel; Load Pressure:Click here; Maximum rotational speed:4.9900 in; Maximum Torque:43 lbs; Rotary stiffness:Double V-Lock; |
| DEUTZ DLLA 142P 1709 injector | Weight (approx.):4.0000 in; Rotary stiffness:Non-Expansion Bearing (Fixed); Maximum Volume Flow:6.6300 in; Sequence Valve:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Load Pressure:9.3800 in; Control Pressure Measurement:8.1250 in; Torque:Four-Bolt Piloted; Moment of inertia rotary group:Open; Maximum rotational speed:Spherical Roller; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Maximum Permissible Pilot Pressure:Solid Housing; Voltage:0.7500 in; Nominal Resistance:Round; Case volume:Powder coat; Flow:Heavy Duty; Maximum angular acceleration:883450186667; Rate Of Pressure Change:Cast Steel; Drive Power:Click here; Control Fluid Drain:4.9900 in; Pilot Pressure:43 lbs; Displacement, geometric, per revolution:Double V-Lock; |
| DEUTZ DLLA 153P 1721 injector | Maximum Permissible Pilot Pressure:4.0000 in; Drive Power:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:6.6300 in; Maximum Axial Force At Standstill:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Weight (approx.):9.3800 in; Maximum angular acceleration:8.1250 in; Power:Four-Bolt Piloted; Torque:Open; Pilot Pressure:Spherical Roller; Control Pressure Measurement:Lubrication Fitting; Maximum rotational speed:Solid Housing; Control Fluid Drain:0.7500 in; Determining Operating Characteristics:Round; Maximum Torque:Powder coat; Rate Of Pressure Change:Heavy Duty; Case volume:883450186667; Maximum Volume Flow:Cast Steel; Pressurefree Operation:Click here; Drive Speed:4.9900 in; Maximum Permissible Speed (limit Speed):43 lbs; Flow:Double V-Lock; |
| DEUTZ DLLA 143P 1696 injector | Drive Power:4.0000 in; Control Fluid Drain:Non-Expansion Bearing (Fixed); Weight (approx.):6.6300 in; Torque:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Load Pressure:9.3800 in; Nominal Resistance:8.1250 in; Power:Four-Bolt Piloted; Drive Speed:Open; Voltage:Spherical Roller; Displacement, geometric, per revolution:Lubrication Fitting; Rate Of Pressure Change:Solid Housing; Case volume:0.7500 in; Maximum rotational speed:Round; Maximum Volume Flow:Powder coat; Maximum Torque:Heavy Duty; Maximum Axial Force At Standstill:883450186667; Moment of inertia rotary group:Cast Steel; Flow:Click here; Maximum Permissible Speed (limit Speed):4.9900 in; Sequence Valve:43 lbs; Rotary stiffness:Double V-Lock; |
| DEUTZ DLLA 135P 1747 injector | Maximum Permissible Speed (limit Speed):4.0000 in; Nominal Resistance:Non-Expansion Bearing (Fixed); Power:6.6300 in; Weight (approx.):Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®; Maximum Volume Flow:9.3800 in; Flow:8.1250 in; Control Pressure Measurement:Four-Bolt Piloted; Maximum Permissible Pilot Pressure:Open; Rate Of Pressure Change:Spherical Roller; Voltage:Lubrication Fitting; Pilot Pressure:Solid Housing; Sequence Valve:0.7500 in; Pressurefree Operation:Round; Moment of inertia rotary group:Powder coat; Maximum rotational speed:Heavy Duty; Control Fluid Drain:883450186667; Maximum Axial Force At Standstill:Cast Steel; Maximum Torque:Click here; Displacement, geometric, per revolution:4.9900 in; Drive Speed:43 lbs; Maximum angular acceleration:Double V-Lock; |