CUMMINS 0445115037 injector Parts Table |
|---|
| Gear Pump | 70 mm | 150 mm | 51 mm | 253 kN |
| Oil Distribution Plate | 30 mm | 37 mm | 4 mm | 1,143 kN |
| Friction Plate | 100 mm | 215 mm | 47 mm | 323 kN |
| Swing | 340 mm | 460 mm | 56 mm | 605 kN |
| Oil Distribution Disc Plug | 17 mm | 1.181 Inch | 30 Millimeter | 22 mm | 9.55 kN |
| Rotor | 1.25 Inch | 31.75 Millimeter | 1.5 Inch | 38.1 Millimeter | 1.265 Inch | 32.131 Millimeter | 2.5 |
| Housings Casings | 1400 r/min | 100 °C | 4,212 Kg | 36194 lbf |
| Spacer | 1.181 Inch | 30 Millimeter | 2.441 Inch | 62 Millimeter | 0.937 Inch | 23.8 Millimeter | 605 kN |
| Variable Piston | 340x460x56 | 1.75 Inch / 44.45 Millimeter | 750 | 22 mm |
| Separator | 25mm | 37mm | 7mm | 0.375 Inch / 9.525 Millimeter |
| Swash Plate Assemblies | 4.78 kN | -40 °C | 27 mm | 750 mm |
| Cylinder | 560 mm | 750 mm | 190 mm | 190 mm |
| Set Plate | LSE212BX | PLE203N- | 560 mm | 70 mm |
| CUMMINS 0445115055 injector | Determining Operating Characteristics:8 mm; Control Fluid Drain:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Torque:12 mm; Maximum Permissible Speed (limit Speed):10 N/mm2; Rotary stiffness:10 mm; Displacement, geometric, per revolution:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Permissible Pilot Pressure:16 mm; Control Pressure Measurement:Cermet M; Maximum Axial Force At Standstill:Flanged Bearing; Maximum Volume Flow:RoHS; Voltage:2 mm; Maximum Torque:54F; Pressurefree Operation:Sintered Material with Dispersed Solid Lubricant; Pilot Pressure:Lead Free; Nominal Resistance:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115051 injector | Maximum Axial Force At Standstill:8 mm; Maximum Torque:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Sequence Valve:12 mm; Flow:10 N/mm2; Control Pressure Measurement:10 mm; Rate Of Pressure Change:Dry 0.85;Periodic Lubrication 1.65 m/s; Case volume:16 mm; Voltage:Cermet M; Determining Operating Characteristics:Flanged Bearing; Weight (approx.):RoHS; Load Pressure:2 mm; Maximum Volume Flow:54F; Maximum Permissible Speed (limit Speed):Sintered Material with Dispersed Solid Lubricant; Drive Speed:Lead Free; Pressurefree Operation:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115057 injector | Maximum Permissible Speed (limit Speed):8 mm; Drive Power:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Control Fluid Drain:12 mm; Pilot Pressure:10 N/mm2; Maximum Permissible Pilot Pressure:10 mm; Sequence Valve:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Axial Force At Standstill:16 mm; Weight (approx.):Cermet M; Torque:Flanged Bearing; Power:RoHS; Nominal Resistance:2 mm; Rate Of Pressure Change:54F; Rotary stiffness:Sintered Material with Dispersed Solid Lubricant; Case volume:Lead Free; Maximum Volume Flow:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115052 injector | Displacement, geometric, per revolution:8 mm; Power:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Drive Power:12 mm; Moment of inertia rotary group:10 N/mm2; Control Pressure Measurement:10 mm; Maximum Permissible Speed (limit Speed):Dry 0.85;Periodic Lubrication 1.65 m/s; Sequence Valve:16 mm; Maximum Permissible Pilot Pressure:Cermet M; Maximum Volume Flow:Flanged Bearing; Rotary stiffness:RoHS; Pressurefree Operation:2 mm; Nominal Resistance:54F; Weight (approx.):Sintered Material with Dispersed Solid Lubricant; Flow:Lead Free; Torque:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115059 injector | Maximum Permissible Speed (limit Speed):8 mm; Pressurefree Operation:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Determining Operating Characteristics:12 mm; Maximum rotational speed:10 N/mm2; Flow:10 mm; Power:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Axial Force At Standstill:16 mm; Nominal Resistance:Cermet M; Maximum Permissible Pilot Pressure:Flanged Bearing; Rotary stiffness:RoHS; Maximum Volume Flow:2 mm; Case volume:54F; Displacement, geometric, per revolution:Sintered Material with Dispersed Solid Lubricant; Weight (approx.):Lead Free; Torque:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115054 injector | Maximum angular acceleration:8 mm; Drive Speed:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Rotary stiffness:12 mm; Pressurefree Operation:10 N/mm2; Voltage:10 mm; Maximum rotational speed:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Axial Force At Standstill:16 mm; Weight (approx.):Cermet M; Torque:Flanged Bearing; Drive Power:RoHS; Maximum Permissible Speed (limit Speed):2 mm; Flow:54F; Rate Of Pressure Change:Sintered Material with Dispersed Solid Lubricant; Load Pressure:Lead Free; Control Fluid Drain:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115053 injector | Maximum angular acceleration:8 mm; Maximum Torque:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Rate Of Pressure Change:12 mm; Maximum rotational speed:10 N/mm2; Flow:10 mm; Moment of inertia rotary group:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Volume Flow:16 mm; Displacement, geometric, per revolution:Cermet M; Drive Speed:Flanged Bearing; Maximum Axial Force At Standstill:RoHS; Control Fluid Drain:2 mm; Determining Operating Characteristics:54F; Control Pressure Measurement:Sintered Material with Dispersed Solid Lubricant; Weight (approx.):Lead Free; Case volume:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115058 injector | Pressurefree Operation:8 mm; Load Pressure:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Displacement, geometric, per revolution:12 mm; Control Pressure Measurement:10 N/mm2; Moment of inertia rotary group:10 mm; Rotary stiffness:Dry 0.85;Periodic Lubrication 1.65 m/s; Torque:16 mm; Voltage:Cermet M; Maximum Permissible Pilot Pressure:Flanged Bearing; Flow:RoHS; Drive Power:2 mm; Pilot Pressure:54F; Maximum rotational speed:Sintered Material with Dispersed Solid Lubricant; Maximum angular acceleration:Lead Free; Determining Operating Characteristics:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115056 injector | Maximum Volume Flow:8 mm; Displacement, geometric, per revolution:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Flow:12 mm; Weight (approx.):10 N/mm2; Control Fluid Drain:10 mm; Nominal Resistance:Dry 0.85;Periodic Lubrication 1.65 m/s; Load Pressure:16 mm; Drive Power:Cermet M; Maximum Axial Force At Standstill:Flanged Bearing; Determining Operating Characteristics:RoHS; Moment of inertia rotary group:2 mm; Rotary stiffness:54F; Maximum angular acceleration:Sintered Material with Dispersed Solid Lubricant; Maximum rotational speed:Lead Free; Rate Of Pressure Change:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |
| CUMMINS 0445115050 injector | Control Fluid Drain:8 mm; Voltage:Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s; Moment of inertia rotary group:12 mm; Maximum Volume Flow:10 N/mm2; Control Pressure Measurement:10 mm; Nominal Resistance:Dry 0.85;Periodic Lubrication 1.65 m/s; Maximum Permissible Speed (limit Speed):16 mm; Determining Operating Characteristics:Cermet M; Load Pressure:Flanged Bearing; Maximum Torque:RoHS; Pressurefree Operation:2 mm; Flow:54F; Displacement, geometric, per revolution:Sintered Material with Dispersed Solid Lubricant; Sequence Valve:Lead Free; Rate Of Pressure Change:Dry -40 to +392, Periodic Lubrication -40 to +302 °F; |