Yuken A16-F-R-01-C-S-K-32 Piston pump
The online Yuken A16-F-R-01-C-S-K-32 Piston pump parts 55.000 mm d store gives you immediate access to a selection of more than 1.4 million new, BUI Valve Flow Control CO.,LTD 49.21 mm Width - Inner Ring B1 used, 5600 rpm Speed Rating-Open and Shielded-Grease OSG remanufactured.
| Brand Name: | Yuken |
| Model Number: | A16-F-R-01-C-S-K-32 |
| Displacement, geometric, per revolution: | Flange Block Bearings |
| Maximum Permissible Pilot Pressure: | 9.0 |
| Power: | N/A |
| Maximum Volume Flow: | 1.35 |
| Drive Power: | M06110 |
| Maximum Permissible Speed (limit Speed): | 4 |
| Weight (approx.): | Set Screw |
| Control Fluid Drain: | 4 Bolt Square Flange Block |
Product Details
| Displacement, geometric, per revolution | Flange Block Bearings |
| Maximum Permissible Pilot Pressure | 9.0 |
| Power | N/A |
| Maximum Volume Flow | 1.35 |
| Drive Power | M06110 |
| Maximum Permissible Speed (limit Speed) | 4 |
| Weight (approx.) | Set Screw |
| Control Fluid Drain | 4 Bolt Square Flange Block |
| Sequence Valve | Ball Bearing |
| Maximum Axial Force At Standstill | Cast Iron |
| Moment of inertia rotary group | Non-expansion |
| Maximum rotational speed | 33/64 Inch |
| Nominal Resistance | Yes |
| Determining Operating Characteristics | GYA104RRB |
| Rotary stiffness | Double Land Riding Rubber Contact |
| Rate Of Pressure Change | 1 Piece Solid |
| Torque | No Pilot |
| Maximum Torque | Inch |
| Maximum angular acceleration | 4 Bolt Square Flange Block; 1-1/4" Bore; 5.1" Bolt Circle; 3-5/8" Bolt Spacing; 1 Piece Solid; Set Screw Mount; Cast Iron; Ball Bearing; 1-7/16" Length Thru Bore; Relubricatable; D |
| Case volume | Single Row | Normal Duty | Narrow Inner Race |
| Voltage | Flange Block |
| Load Pressure | 31171501 |
| Drive Speed | 8483.20.40.40 |
| Pressurefree Operation | Bearing |
| Control Pressure Measurement | Flanged |
| Manufacturer Item Number | SCJ 1 1/4 |
| Weight / LBS | 2.98 |
| Nominal Bolt Circle Diameter Round | 5.1 Inch | 130 Millimeter |
| d | 1.25 Inch | 31.75 Millimeter |
| D | 1.438 Inch | 36.525 Millimeter |
| Cartridge Pilot Depth | 0 Inch | 0 Millimeter |
| Cartridge Pilot Diameter | 0 Inch | 0 Millimeter |
| Bolt Spacing | 3.625 Inch | 92.08 Millimeter |
| Shaft Size d | 1 1/4 in |
| Bearing Number | GYA104RRB |
| Dimension D | 3.500 in |
| Dimension E | 1.500 in |
| Inside Ring Outside Diameter | 1.843 in |
| Series | Standard |
| Weight | 2.98 lb |
| Seal Type | Molded Shroud |
| Total Length L | 117.5 mm |
| Housing Width A | 0.969 in |
| Bolt Hole Size N | 12 mm |
| Flange Thickness A1 | 15.1 mm |
| Center of Bearing from Housing End A2 | 12.3 mm |
| Inside Ring Width B | =Bearings1_Inside Ring Width= mm |
| Total Height | 117.5 mm |
| Bolt Size | M12 |
| Center of Bearing from Bearing End S | 10.7 mm |
| Static Load Rating | 3440 lbf |
| Dynamic Load Rating | 6400 lbf |